Potentiometer

A voltmeter may also be realized using a potentiometer, which is a length of uniform resistance material (wire or carbon film, for instance) and a "wiper" that can short-circuit any portion of the material, thereby changing effective resistance between the wiper and an end terminal of the potentiometer. The unknown voltage source may be connected to a current detector, which is in turn connected to the potentiometer's wiper, while the known voltage source is connected to an end terminal of the potentiometer. Then the wiper position is adjusted to change the potentiometer's effective resistance until a balance is obtained and no current is detected. At this time, record the potentiometer's wiper position. For example, if our potentiometer were a length of very long wire and our wiper were some sort of metal wand in contact with that wire, record the length of wire between the wiper and the end of the wiper that is in our circuit. Now replace the unknown voltage supply with the known voltage supply and repeat the procedure. The unknown voltage is then given by the product of the known voltage and the recorded used length of wire corresponding to the unknown voltage, divided by the recorded length of wire corresponding to the reference voltage.